Electric vehicle ownership is growing faster in newer Peterborough developments like Hampton than almost anywhere else in the city. With most Hampton homes having a driveway or garage, and with residents generally being earlier adopters of technology, the demand for home EV charging installations has surged. JDNA LTD’s NICEIC approved electricians have installed home chargers across Hampton Vale, Hampton Hargate, and Hampton Water, and we understand the specific characteristics of these homes.
If you are buying an EV or already have one and are still charging from a standard three-pin socket, this guide explains why that is costing you time and efficiency, what a proper home charger installation involves, and what it costs in Hampton.
Why Charging From a Standard Socket Is Not Good Enough
A standard UK three-pin socket delivers roughly 2.3kW of power. Charging a typical 60kWh EV battery from empty to full on a three-pin socket takes over 26 hours. A dedicated home EV charger — known as a wallbox — delivers 7kW on a single-phase supply (standard in most Hampton homes). At 7kW, the same 60kWh battery charges from empty to full in under 9 hours — comfortably overnight. Most Hampton EV owners are looking at a 7kW single-phase wallbox installation.
Beyond speed, a dedicated EV charger is safer. It is installed on its own dedicated circuit with appropriate RCD protection, rated cable, and a proper weatherproof outdoor socket — not a 13-amp indoor socket extended via an extension lead, which is a fire and electrical hazard.
What Is Involved in an EV Charger Installation in a Hampton Home?
The process starts with our NICEIC electrician assessing your consumer unit (fuse board) to confirm there is capacity for an additional 32-amp circuit. Most Hampton homes have modern consumer units with capacity to spare — but we check this first.
We then route a 6mm or 10mm twin-and-earth cable from the consumer unit to the planned location of the charger, which is usually on the front wall of the house near the driveway or inside the garage. The charger unit itself is surface-mounted on the wall, connected to the cable, and tested in line with BS 7671 (IET Wiring Regulations). We provide a Minor Electrical Installation Works Certificate as part of the job. The installation typically takes 3 to 5 hours.
EV Charger Installation Cost in Hampton, Peterborough
A full home EV charger installation in Hampton — including supply and fitting of a smart 7kW wallbox, dedicated circuit from the consumer unit, all cabling and containment, and certification — typically costs £800 to £1,200.
Popular smart chargers we install include Ohme, Myenergi Zappi, Hypervolt, and Pod Point. Smart chargers allow you to schedule charging during off-peak electricity tariff hours (typically overnight) and can be controlled from a phone app — this can significantly reduce the cost of charging an EV at home.
Frequently Asked Questions
Can I install an EV charger on a terraced Hampton home with no driveway?
Without off-street parking, a home charger installation is not practical — you need a way to charge the car without the cable running across a pavement. We can advise on the options available for your specific property layout.
How long does EV charger installation take in Hampton?
Most Hampton EV charger installations take between 3 and 5 hours in a single visit. We leave you with a completed, certified installation ready to use.
Do JDNA LTD electricians cover all of Hampton?
Yes — we cover Hampton Vale, Hampton Hargate, Hampton Water, and all surrounding PE7 areas. Call 01733 639329 or book online at jdna.co.uk.
Need help from a local Peterborough expert? Call JDNA LTD on 01733 639329 or book online. Gas Safe, NICEIC approved, 5-star rated.
